GERLIEVA shows new developments at the EUROGUSS 2020
Even if the technology in the die casting process using micro-spraying has made enormous progress in recent years to save lubricant and energy and to protect the die, there are still optimizations on a high level.
The manufacturer GERLIEVA Sprühtechnik GmbH recently presented its latest developments at the EUROGUSS 2020 in Nuremberg:
Customized spray and blow-out heads for micro-spraying
After a successful market launch of standard spray and blow-out heads for micro-spraying, the product range has been extended in recent months to include customized spray and blow-out heads for micro-spraying.
To the already known advantages of micro-spraying such as:
Customized spray heads allow multiple dies or complex geometric shapes for structural parts to be sprayed in one position, constant and exactly repeatable. Moving the spray head or oscillating during spraying is no longer necessary. This results in a significant reduction of the cycle time.
New series of spray nozzles, reduce costs through less air consumption For conventional spraying for cooling and lubricant, it is also becoming increasingly important to reduce the consumption of lubricant and especially to reduce the spray air consumption. The consumption of compressed air in foundries is a very high cost factor. The reduction of the compressed air consumption and the spray air pressure, which must be kept in the supply network, can be successfully realized with this new series of spray nozzles.
With this new series of spray nozzles, lubricant can be sprayed homogeneously over a large area with significantly reduced consumption of spray air and pressure and this even with a better cooling effect per second.
Email info(at)gerlieva.com Web: https://www.gerlieva.de/en
Yes, I would like to receive the bi-weekly Foundry-Planet newsletter with all latest news, product and material tests and reports. Plus the special newsletters – all can be cancelled anytime and at no cost.
Check here our privacy policy.